Event Calendar

No Call/No Show Policy Once you have registered your employees for class, we ask that you adhere to our No Call/No Show policy. This policy requires a company to contact our staff at least 72-hours prior to class, if their employee is unable to attend a registered class. A No Call/ No Show” to training could result in a 3-month suspension from registering for RTP classes and program courses. If your employee can not attend a registered class, please contact us at info@alabamartp.org.

Mon Tue Wed Thu Fri Sat Sun
1
2
AC/DC Basic E...
AC/DC Basic E...
Start Date: February 2, 2026 7:00 AM
End Date: February 6, 2026 3:00 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This class covers the following topics: Basic electrical circuits and measurements, Circuit analysis, Inductance/capacitance, Circuit application, and Transformers. SACA Certification is given after successful completion of the class. Basic computer skills are required...

Hydraulics/Pn...
Hydraulics/Pn...
Start Date: February 2, 2026 7:30 AM
End Date: February 5, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

Complete hydraulic and pneumatic systems are studied including power sources, reservoirs, pumps, compressors, lines, valves, and actuators....

FANUC Handlin...
FANUC Handlin...
Start Date: February 2, 2026 7:30 AM
End Date: February 5, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The course covers the tasks that an operator, technician, engineer or programmer needs to set up and program a FANUC Robotics HandlingTool Software Package.  Recommended safety procedures are integrated into all training exercises. The course consists of lectures, chapter reviews, demonstrations and a series of lab exercises designed to reinforce what the student has learned. […]...

ABB Robotics ...
ABB Robotics ...
Start Date: February 2, 2026 7:30 AM
End Date: February 5, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The goal of this course is to teach students the basics in programming industry robots with IRC5 controllers. ...

3
No Events for Today
4
5
Forklift Safe...
Forklift Safe...
Start Date: February 5, 2026 7:30 AM
End Date: February 5, 2026 3:00 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The Forklift Safety class is designed for individuals needing to learn the skills needed for safely operating a forklift prior to becoming certified by their employer....

6
7
8
9
OSHA 10 Hour ...
OSHA 10 Hour ...
Start Date: February 9, 2026 7:00 AM
End Date: February 10, 2026 3:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The OSHA 10-hour safety class is designed to familiarize workers with OSHA standards as well as safety and health hazards common to the workplace...

Motoman YRC10...
Motoman YRC10...
Start Date: February 9, 2026 7:30 AM
End Date: February 12, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This course is an introduction to programming the YRC1000 controller. The course pertains to the programming of press tending, case packing, machine tending, and palletizing cells. No prior knowledge of robot programming or the YRC1000 controller is required.This course consists of classroom lectures, demonstrations, discussions and hands-on practice exercises....

Introduction ...
Introduction ...
Start Date: February 9, 2026 7:30 AM
End Date: February 12, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This class will provide trainees with the knowledge of basic CNC Turning Operations  performed on a lathe or turning center...

Rockwell CCP1...
Rockwell CCP1...
Start Date: February 9, 2026 7:30 AM
End Date: February 12, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The course will assist you in developing and buildinga solid foundation with a fundamental knowledge ofControlLogix and other Logix5000™ systems....

10
11
12
13
14
15
16
AC/DC Basic E...
AC/DC Basic E...
Start Date: February 16, 2026 7:00 AM
End Date: February 20, 2026 3:00 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This class covers the following topics: Basic electrical circuits and measurements, Circuit analysis, Inductance/capacitance, Circuit application, and Transformers. SACA Certification is given after successful completion of the class. Basic computer skills are required...

Welding: Intr...
Welding: Intr...
Start Date: February 16, 2026 7:30 AM
End Date: February 19, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

Topics include Safety, Power Source, Equipment Setup, Polarity and selecting the correct electrode for the welding processes. The class will perform striking an arc, welding fillet welds in the 1F, 2f, 3f, and 4f positions on carbon steel plate. There are no prerequisites for this class. This class is designed to give you the basic […]...

FANUC Robot O...
FANUC Robot O...
Start Date: February 16, 2026 7:30 AM
End Date: February 18, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The course covers basic operations of FANUC Robots, using the teach pendant as the main interface point...

Omron Sysmac ...
Omron Sysmac ...
Start Date: February 16, 2026 7:30 AM
End Date: February 19, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This course provides an introduction to the Omron family of PLC’s. Basic terminology, memory structures, and PLC operations are defined. I/O addressing is discussed as well as numbering systems including binary, BCD, hexadecimal, and decimal.  The class also provides basic programming skills for Omron PLC’s.  The course will cover wiring to and from the PLC, […]...

Rockwell CCP1...
Rockwell CCP1...
Start Date: February 16, 2026 7:30 AM
End Date: February 19, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The course will assist you in developing and buildinga solid foundation with a fundamental knowledge ofControlLogix and other Logix5000™ systems....

17
Overhead Cran...
Overhead Cran...
Start Date: February 17, 2026 7:30 AM
End Date: February 17, 2026 3:00 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The Overhead Crane Safety Class is designed to familiarize individuals with the essential safety skills and procedures for overhead crane operations....

18
Lockout/Tagou...
Lockout/Tagou...
Start Date: February 18, 2026 7:30 AM
End Date: February 18, 2026 3:00 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This safety course is designed to provide participants with training on Lockout/Tagout responsibilities, acceptable practices, and procedures with respect to safety and compliance....

19
20
21
22
23
Amatrol Elect...
Amatrol Elect...
Start Date: February 23, 2026 7:00 AM
End Date: February 26, 2026 3:00 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

Amatrol’s Electric Motor Control Learning System (85-MT5) covers electric relay control of AC electric motors found in industrial, commercial, and residential applications. Learners study industry-relevant skills including how to operate, install, design, and troubleshoot AC electric motor control circuits for various applications. ...

Rockwell CCP1...
Rockwell CCP1...
Start Date: February 23, 2026 7:30 AM
End Date: February 26, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The basic skills taught in this course apply to all Logix5000 platforms; you can apply what you have learned to the specific platform used in your plant. Throughout this course, you will have the opportunity to practice the skills you have learned through a variety of hands-on exercises...

Welding: Intr...
Welding: Intr...
Start Date: February 23, 2026 7:30 AM
End Date: February 26, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This class will provide an overview of the equipment for Gas Metal Arc welding. Topics include Safety, Power Source, Wire Feeders, Welding Guns, Equipment Setup, and Consumables. The class will perform striking an arc, Fillet weld in the 1f, 2f, 3f, and 4f positions on carbon steel plate....

FANUC Handlin...
FANUC Handlin...
Start Date: February 23, 2026 7:30 AM
End Date: February 26, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

The course covers the tasks that an operator, technician, engineer or programmer needs to set up and program a FANUC Robotics HandlingTool Software Package.  Recommended safety procedures are integrated into all training exercises. The course consists of lectures, chapter reviews, demonstrations and a series of lab exercises designed to reinforce what the student has learned. […]...

AC/DC Basic E...
AC/DC Basic E...
Start Date: February 23, 2026 7:30 AM
End Date: February 26, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This class covers the following topics: Basic electrical circuits and measurements, Circuit analysis, Inductance/capacitance, Circuit application, and Transformers....

Kuka Robotics...
Kuka Robotics...
Start Date: February 23, 2026 7:30 AM
End Date: February 26, 2026 4:30 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This training class provides the basic skills required for operating and recovering a KUKA robot system...

24
CPR/ FIRST AI...
CPR/ FIRST AI...
Start Date: February 24, 2026 7:30 AM
End Date: February 24, 2026 3:00 PM
Location: 6506 U.S. Hwy 31, Tanner, AL 35671

This course is for non-medical individuals and teaches basic CPR skills in addition to basic first aid treatment for common medical and injury emergencies...

25
26
27
28